1. After the last batch of chickens are released, arrange the house to be cleaned and disinfected as soon as possible to ensure sufficient empty time.

2. The litter should be clean and dry, and the finishing should be smooth. At the same time, disinfection is required.

3. The same chicken house will raise the same batch of chickens to prevent cross-contagion of diseases.

4, at least 24 hours in advance to raise the temperature of the ground litter at 32 ~ 35 °C inpoultry cage manufacturer in china.

5. Density: Under normal circumstances, the stocking density is 8/m2, and the winter can be increased to 10/m2. The brooding starts at 35 per square meter.

6. Because the chick’s thermal regulation system is not yet fully developed, some heating systems are needed to heat the chicks. Special attention should be paid to whether the behavior of the chicks is consistent with the temperature inside the house.

7. Choosing the right light is good for the growth and development of the chicken.

8, the first period of 1-2 weeks to maintain relatively high humidity, 3 weeks old to the bar should maintain relatively low humidity, the reference standard is: 1-2 weeks, relative humidity can be controlled at 65% -70%, later controlled at 55% – 60%, the minimum is not less than 40%.

9. Good ventilation is required throughout the feeding cycle, especially during the late feeding period. Simply put: when people go to the house, they can smell ammonia, odor and other pungent smells.